“_Aston Connect” will allow you to save your credentials, so you won’t need to manually log onto WiFi every time
NOTE 1: you should beware of lending your device to someone else if you save your credentials, as they will log onto the wireless network under your name
NOTE 2: Whenever you reset your University password, you will need to reconfigure your saved credentials on your device.
You can configure your device by downloading the appropriate profile below, if your device isn’t listed, you can manually configure your device by following the instructions further down the page.
Download the APPLE iOS/OSX Device Configuration Profile
Download the WINDOWS Device Configuration Profile
You should delete any existing profile for “_Aston Connect”, go to Settings -> Wi-Fi, here you will see a list of available Wi-Fi networks. From the list of networks, select and hold “_Aston Connect” and choose Forget Network
You can download the Certificate here if your device requires you to do so: AddTrustExternalCARoot.crt
This guide will enable you to connect a laptop running Linux to the "_Aston Connect" network. The screenshots were taken from Ubuntu, but these guidelines can easily be adapted for other distributions. Users of Mandriva should find that they should just need to enter their AD username and password - the certificate will be retrieved automatically.
Firstly you will need a copy of the Global Root Certificate in .pem format. If you don't have this, then it can be downloaded here: AddTrustExternalCARoot.crt Once you have a copy of the certificate, then save it somewhere on the laptop.
When you are in range of "_Aston Connect", you should see it show up on Network Manager's list of available networks, or by clicking on the WiFi icon on your desktop.
Choose "_Aston Connect", and you should get a dialogue box asking you to provide credentials and to state the location of the certificate:
Change Authentication to Protected EAP (PEAP), browse to where you saved the certificate, put in your username and password and click on connect. A few seconds later you should have a connection.
Please visit the IT Helpdesk for any assistance.